Register now for better personalized quote!

HOT NEWS

Comprehensive Guide to the CloudEngine S6730-H24X6C-V2: Features, Specifications, and Applications

Jan, 24, 2025 Hi-network.com

cloudengine s6730-h24x6c-v2

The CloudEngine S6730-H24X6C-V2 is a next-generation enterprise-class switch developed by Huawei. Designed to meet the evolving demands of modern networks, this switch offers high performance, flexibility, and advanced features suitable for various applications, including data centers, campus networks, and metropolitan area networks.

Key Features

▪ High Performance:  The switch provides a switching capacity of up to 1.68 Tbps, ensuring efficient data forwarding for high-bandwidth applications. 
▪ Advanced Port Configuration:  Equipped with 24 x 10 Gigabit SFP+ ports and 6 x 40/100 Gigabit QSFP28 ports, it offers versatile connectivity options. 
▪ Flexible Uplink Ports:  The 6 uplink ports support 40GE by default and can be upgraded to 100GE through optional licenses, providing scalability for future network growth. 
▪ Dual Power Modules:  Supports dual pluggable power modules with 1+1 redundancy, enhancing system reliability. 
▪ Intelligent Stack (iStack):  Allows multiple switches to function as a single logical unit, simplifying management and increasing scalability. 
▪ VXLAN Support:  Enables network virtualization, allowing for the creation of multiple virtual networks over a single physical infrastructure. 
▪ Comprehensive IPv6 Support:  Fully compatible with IPv6, ensuring future-proofing as networks transition from IPv4. 
▪ Enhanced Security Features:  Includes advanced security measures to protect against unauthorized access and threats. 
▪ Energy Efficiency:  Designed with energy-saving features to reduce power consumption without compromising performance. 
▪ Cloud Management:  Supports cloud-based network management, allowing for centralized control and monitoring. 

Technical Specifications

Ports:  24 x 10 Gigabit SFP+ ports, 6 x 40/100 Gigabit QSFP28 ports 
Switching Capacity:  1.68 Tbps (device) / 2.4 Tbps (system) 
Forwarding Performance:  490 Mpps 
Power Supply:  Dual pluggable power modules, supporting 1+1 redundancy 
Dimensions (W x D x H):  442 mm x 420 mm x 43.6 mm 
Weight:  Approximately 7.5 kg 
Operating Temperature:  0°C to 40°C (32°F to 104°F) 
Relative Humidity:  5% to 95% (non-condensing) 
Input Voltage:  100V to 240V AC, 50/60 Hz 
Power Consumption:  Maximum 150W 

High Performance and Scalability

The CloudEngine S6730-H24X6C-V2 is engineered to deliver exceptional performance, catering to the high-throughput demands of contemporary networks. With a robust switching capacity of 1.68 Tbps and forwarding performance reaching 490 Mpps, it ensures rapid and efficient data processing. The inclusion of 24 x 10 Gigabit SFP+ ports provides ample high-speed connectivity for various devices and applications. Additionally, the 6 uplink ports, which support 40GE by default and are upgradeable to 100GE through optional licenses, offer flexibility and scalability, accommodating future network expansion and increased traffic loads.

Advanced Networking Features

This switch is equipped with a suite of advanced features designed to enhance network functionality and efficiency. The Intelligent Stack (iStack) technology allows multiple switches to operate as a single logical unit, simplifying network management and enhancing scalability. Support for Virtual Extensible LAN (VXLAN) enables the creation of virtualized networks, allowing for the segmentation of network resources and the deployment of multi-tenant environments. Comprehensive IPv6 support ensures seamless integration into modern IP networks, facilitating a smooth transition from IPv4 and future-proofing the network infrastructure.

Reliability and Redundancy

Reliability is a cornerstone of the CloudEngine S6730-H24X6C-V2's design. It supports dual pluggable power modules with 1+1 redundancy, ensuring uninterrupted operation even in the event of a power module failure. The switch also features hot-swappable components, allowing for maintenance and upgrades without impacting network performance. Advanced link aggregation and redundancy protocols further enhance network resilience, providing multiple pathways for data and preventing single points of failure.

Security Capabilities

Security is paramount in network design, and the CloudEngine S6730-H24X6C-V2 incorporates robust measures to safeguard data and resources. It offers advanced security features, including Access Control Lists (ACLs), port security, and DHCP snooping, to prevent unauthorized access and mitigate potential threats. The switch also supports 802.1X authentication, ensuring that only authorized devices can connect to the network. These comprehensive security capabilities help maintain the integrity and confidentiality of data across the network.

Energy Efficiency

In today's environmentally conscious world, energy efficiency is a critical consideration. The CloudEngine S6730-H24X6C-V2 is designed with energy-saving features that reduce power consumption without compromising performance. It utilizes advanced hardware and software mechanisms to optimize energy usage, contributing to lower operational costs and a reduced environmental footprint.

Management and Operations

Managing the CloudEngine S6730-H24X6C-V2 is streamlined through its support for cloud-based network management platforms. This allows for centralized control, monitoring, and configuration, simplifying administrative tasks and providing greater visibility into network operations. The switch also supports various management protocols, including SNMP, RMON, and Syslog, facilitating integration into existing network management systems.

Deployment Scenarios

The versatility of the CloudEngine S6730-H24X6C-V2 makes it suitable for a wide range of deployment scenarios. In data centers, it can function as a high-performance top-of-rack or aggregation switch, providing rapid data processing and flexible connectivity options. Within campus networks, it serves effectively at the core or aggregation layer, supporting high-speed data transmission and advanced networking features. Additionally, its robust performance and feature set make it an ideal choice for metropolitan area networks, where it can handle diverse traffic types and ensure reliable service delivery.


Comparison with Other Models

Within the CloudEngine S6730-H-V2 series, the S6730-H24X6C-V2 distinguishes itself with its specific port configuration and performance metrics. Compared to models like the S6730-H48X6C-V2, which offers 48 x 10 Gigabit SFP+ ports, the S6730-H24X6C-V2 provides a more compact configuration with 24 x 10 Gigabit SFP+ ports, making it ideal for environments that require fewer access ports but still demand high-speed uplink capabilities. 


The S6730-H48X6C-V2, on the other hand, may be more suitable for larger deployments requiring a higher density of 10G ports. However, both models share the same 6 x 40/100GE uplink ports, ensuring consistent uplink performance across the series. Choosing between these models largely depends on the specific port density and scalability needs of the deployment scenario. 


Additionally, the power consumption of the S6730-H24X6C-V2 is slightly lower than its larger counterpart, which can be an important factor for energy-conscious organizations. Both models, however, share similar features such as dual power modules, iStack support, VXLAN functionality, and advanced security options, making them versatile choices for a range of enterprise network applications.


Huawei CloudEngine S6730-H24X6C Switches

Huawei All Series Switches New and Used

For Cisco product list and quote, please visit: https://www.hi-network.com/categories/cisco or contact us at www.hi-network.com  (Email: [email protected])



S6730-H24X6C-V2 Overview

Table 4-3 Basic information about the S6730-H24X6C-V2

ItemDetails
DescriptionS6730-H24X6C-V2 (24*10GE SFP+ ports, 6*40GE QSFP28 ports, optional license for upgrade to 6*100GE QSFP28, without power module)
Part Number02354HHV
ModelS6730-H24X6C-V2
First supported versionV600R022C00
RemarksBy default, QSFP28 optical ports work at 40 Gbit/s. A 100GE RTU license can be used to upgrade the port rate to 100 Gbit/s. To configure the ports to work at 100 Gbit/s, run the license active command to activate the license, and then run the active port-license and port mode 100GE interface commands.

Components

Figure 4-2 S6730-H24X6C-V2 appearance

1

Twenty-four 10GE SFP+ ports

2

Six 40GE/100GE QSFP28 optical ports

NOTE:

By default, QSFP28 optical ports work at 40 Gbit/s. A 100GE RTU license can be used to upgrade the port rate to 100 Gbit/s. To configure the ports to work at 100 Gbit/s, run the license active command to activate the license, and then run the active port-license and port mode 100GE interface commands.

3

Ground screw

NOTE:It is used with a ground cable.

4

SSD card slot

NOTE:

This slot is reserved and cannot be used.

5

One console port

6

One ETH management port

7

One USB port

8

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

9

Fan module slot 1

NOTE:

Applicable fan module: FAN-031A-B (Fan Box (B, Fan Panel Side Exhaust))

10

Fan module slot 2

NOTE:

Applicable fan module: FAN-031A-B (Fan Box (B, Fan Panel Side Exhaust))

11

Fan module slot 3

NOTE:

Applicable fan module: FAN-031A-B (Fan Box (B, Fan Panel Side Exhaust))

12

Fan module slot 4

NOTE:

Applicable fan module: FAN-031A-B (Fan Box (B, Fan Panel Side Exhaust))

13

Power module slot 1

NOTE:

Applicable power modules:

  • PAC600S12-CB (600 W AC&240 V DC Power Module)

  • PAC600S12-EB (600 W AC&240 V DC Power Module)

  • PAC600S12-DB (600 W AC&240 V DC Power Module)

  • PDC1000S12-DB (1000 W DC Power Module)

14

Power module slot 2

NOTE:

Applicable power modules:

  • PAC600S12-CB (600 W AC&240 V DC Power Module)

  • PAC600S12-EB (600 W AC&240 V DC Power Module)

  • PAC600S12-DB (600 W AC&240 V DC Power Module)

  • PDC1000S12-DB (1000 W DC Power Module)

Ports

Table 4-4 Ports on the S6730-H24X6C-V2

PortConnector TypeDescriptionAvailable Components
10GE SFP+ optical portSFP+A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.
  • GE eSFP optical modules

  • GE-CWDM eSFP optical modules

  • GE-DWDM eSFP optical modules

  • GE SFP copper module

  • 10GE SFP+ optical modules

  • 10GE-CWDM SFP+ optical modules

  • 10GE-DWDM SFP+ optical modules

  • 10GE SFP+ copper module (supported in V600R023C10 and later versions)

  • 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables (only used for stack connection in versions earlier than V600R023C00)

  • 3 m and 10 m SFP+ AOC cables

  • 0.5 m and 1.5 m SFP+ dedicated stack cables (only used for stack connection; zero-configuration stacking supported from V600R023C00)

40GE/100GE QSFP28 optical portQSFP28

By default, QSFP28 optical ports work at 40 Gbit/s. A 100GE RTU license can be used to upgrade the port rate to 100 Gbit/s. To configure the ports to work at 100 Gbit/s, run the license active command to activate the license, and then run the active port-license and port mode 100GE interface commands.

QSFP28 optical ports cannot be split.

  • 40GE QSFP+ optical modules

  • 1 m, 3 m, and 5 m QSFP+ to QSFP+ high-speed copper cables (only used for stack connection in versions earlier than V600R023C00)

  • 10 m QSFP+ to QSFP+ AOC cable

  • 100GE QSFP28 optical modules (supported with a license loaded)

  • 1 m QSFP28 to QSFP28 high-speed copper cables (only used for stack connection in versions earlier than V600R023C00, supported with a license loaded)

  • 10 m QSFP28 to QSFP28 AOC cable (supported with a license loaded)

  • 2 m QSFP28 dedicated stack cable (only for zero-configuration stacking, supported in V600R023C00 and later versions)

Console portRJ45The console port is connected to a console for on-site configuration.

Console cable

ETH management portRJ45You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely.

Ethernet cable

USB portUSB 2.0 Type A

The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.

USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor.

USB flash drive

Indicators and Buttons

The S6730-H24X6C-V2 has the same types of indicators as the S6730-H48X6C-V2. For details, see the S6730-H48X6C-V2.

Power Supply System

The switch can use a single power module or two power modules for 1+1 power redundancy. Pluggable AC and DC power modules can be used together in the same switch.

Heat Dissipation System

The switch uses pluggable fan modules for forced air cooling. Air flows in from the front side and exhausts from the rear panel.

This figure only shows the airflow direction and does not depict the actual device.

Technical Specifications

Table 4-5 Technical specifications of the S6730-H24X6C-V2

ItemSpecification
Dimensions without packaging (H x W x D) [mm(in.)]

Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.40 in. x 16.54 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 446.0 mm (1.72 in. x 17.40 in. x 17.56 in.)

Dimensions with packaging (H x W x D) [mm(in.)]175.0 mm x 650.0 mm x 550.0 mm (6.89 in. x 25.59 in. x 21.65 in.)
Chassis height [U]1 U
Chassis materialMetal
Weight without packaging [kg(lb)]5.62 kg (12.39 lb)
Weight with packaging [kg(lb)]8.9 kg (19.62 lb)
Typical power consumption [W]149 W
Typical heat dissipation [BTU/hour]508.4 BTU/hour
Maximum power consumption [W]

High temperature 45°C (113°F), 100% traffic, and dual power modules: 181 W

High temperature 45°C (113°F), 100% traffic, long-distance optical module, 100% fan speed, and dual power modules: 254 W

Maximum heat dissipation [BTU/hour]

High temperature 45°C (113°F), 100% traffic, and dual power modules: 617.59

High temperature 45°C (113°F), 100% traffic, long-distance optical module, 100% fan speed, and dual power modules: 866.67

Static power consumption [W]97 W
MTBF [years]62.27 years
MTTR [hours]2 hours
Availability> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]65 dB(A)
Noise at normal temperature (acoustic pressure) [dB(A)]52 dB(A)
Number of card slots0
Number of power slots2
Number of fans modules4
Redundant power supply

1+1

Pluggable AC and DC power modules can be used together in the same switch.

Long-term operating temperature [°C(°F)]-5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.)
Restriction on the operating temperature variation rate [°C(°F)]

When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Devices cannot start when the temperature is lower than 0°C (32°F).

When the QSFP-100G-ER4 optical module is used, the operating temperature ranges from -5°C to +40°C (23°F to 104°F).

Storage temperature [°C(°F)]-40°C to +70°C (-40°F to +158°F)
Long-term operating relative humidity [RH]5% to 95%, noncondensing
Long-term operating altitude [m(ft.)]0-5000 m (0-16404 ft.)
Storage altitude [m(ft.)]0-5000 m (0-16404 ft.)
Power supply modePluggable power supply
Rated input voltage [V]
  • AC input: 100 V AC to 240 V AC; 50/60 Hz

  • High-voltage DC input: 240 V DC

  • DC input: –48 V DC to –60 V DC

Input voltage range [V]
  • AC input: 90–290 V AC; 45–65 Hz

  • High-voltage DC input: 190 V DC to 290 V DC

  • DC input: -38.4 V DC to -72 V DC

Maximum input current [A]The current specifications depend on the pluggable power modules in use. For details, see the related power module specifications.
Memory4 GB
Flash memoryPhysical space: 2 GB
Console portRJ45
Eth Management portRJ45
USBSupported
RTCSupported
RPS inputNot supported
Service port surge protection [kV]-
Power supply surge protection [kV]
  • AC power module configured: ±6 kV in differential mode, ±6 kV in common mode

  • DC power module configured: ±2 kV in differential mode, ±4 kV in common mode

Ingress protection level (dustproof/waterproof)IP20
Types of fansPluggable
Heat dissipation modeHeat dissipation with fan, intelligent fan speed adjustment
Airflow directionAir intake from front, air exhaustion from rear (front-to-rear)
PoENot supported
Certification

EMC certification

Safety certification

Manufacturing certification


tag-icon Hot Tags : Huawei Switches

Copyright © 2014-2024 Hi-Network.com | HAILIAN TECHNOLOGY CO., LIMITED | All Rights Reserved.
Our company's operations and information are independent of the manufacturers' positions, nor a part of any listed trademarks company.