Register now for better personalized quote!

HDX Blog Series #3: 802.11ac Beamforming At Its Best: ClientLink 3.0

Jan, 22, 2014 Hi-network.com

Editor's Note: This is the second of a four-part deep dive series into High Density Experience (HDX), Cisco's latest solution suite designed for high density environments and next-generation wireless technologies. For more on Cisco HDX, visit www.cisco.com/go/80211ac.  Read part 1 here. Read part 2 here.

The 802.11ac wireless networking standard is the most recent introduction by the IEEE (now ratified), and is rapidly becoming more accepted and reliable industry standard. The good news is that the client and vendor adoption rate for 802.11ac is growing at a much higher pace as compared to when 802.11n was introduced back in 2009. There has been an accelerated growth seen with the mobile and laptop devices entering the wireless market embedded with an 802.11ac WiFi chipset. Unlike in the past, laptop, smartphone and tablet manufacturers are now acknowledging the fact that staying up to date with the latest Wi-Fi standards is as important for the bandwidth hungry users as having a better camera or a higher resolution display.

With the launch of the new 802.11ac AP 3700, Cisco introduces the Cisco HDX (High Density Experience) Technology. Cisco HDX is a suite of solutions aimed towards augmenting the higher performance, more speed and better client connectivity that 802.11ac standard delivers today.

ClientLink 3.0 features as an integral part of Cisco HDX technology designed to resolve the complexities that comes along with the new BYOD trend driving the high proliferation of 802.11ac capable devices.

So what is ClientLink 3.0 technology and how does it work?

ClientLink 3.0 is a Cisco patented 802.11ac/n/a/g beamforming technologywhich is designed to enable the access point with implicit beamforming (requiring no client participation, or any special software or hardware on the wireless client devices) in addition to the explicit standard-based beamforming mechanisms that is defined in the 802.11ac standard. ClientLink 3.0 thrives on the advanced signal processing techniques in combination with the 4

tag-icon Hot Tags : access point Antenna 802.11 AP client ClientLink beamforming cell size client connectivity

Copyright © 2014-2024 Hi-Network.com | HAILIAN TECHNOLOGY CO., LIMITED | All Rights Reserved.