Detail: | 48 Ethernet 10/100/1000 ports, with 1 interface slot, without power module, 2 extension slots |
Model: | S5700-52C-SI (02352356) |
Condition: | Factory Sealed New |
Related: | Genuine New S-SFP-GE-LH40-SM1550 (02317347) Huawei 1000BASE-LH40 SFP 1550nm 40km DOM Duplex LC SMF Transceiver Module Genuine New OMXD30000 (02313URC 02318169) Huawei 10GBASE-SR SFP+ 850nm 300m DOM Duplex LC MMF Optical Transceiver Module Huawei Switch S5700-52C-EI (02352354) Huawei Switch S5700-52C-PWR-SI (02354135) |
Warranty: |
3 Years-Warranty
100% Money-back
Free After-Sales Service
|
Shipping: |
Air Shipping to
United States
, Most Customers Receive during 5-7 Days
?
If you finish the payment today,
your order will arrive within the estimated delivery time. |
Ships to:
5.5
|
2-7 Days
US$
|
Payment: |
More
|
Huawei S5700-52C-SI is one of the S5700 Series Switches. The S5700-SI series are gigabit Layer 3 Ethernet switches based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). It provides a large switching capacity, high-density GE interfaces, and 10 GE uplink interfaces. With extensive service features and IPv6 forwarding capabilities, the S5700-SI is applicable to various scenarios. For example, it can be used as an access or aggregation switch on campus networks or an access switch in data centers. The S5700-SI integrates many advanced technologies in terms of reliability, security, and energy saving. It employs simple and convenient means of installation and maintenance to reduce customers' OAM cost and help enterprise customers build a next-generation IT network.
Model | S5700-52C-SI |
Part Number | 02352356 |
Fixed Interfaces | 48 Ethernet 10/100/1,000 ports |
Subcards supported | 4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard |
Extended Slots | two extended slots, one for an uplink subcard and the other for a stack card |
Power Supply | Double hot swappable AC/DC power supplies |
Forwarding Performance | 132 Mpps |
Switching Capacity | 256 Gbit/s |
Memory (RAM) | 256 MB |
Flash | 32 MB |
RPS | Not supported |
PoE | Not supported |
Maximum power consumption (100% throughput, full speed of fans) | 78 W |
Dimensions (W x D x H) | 442.0 mm x 420.0 mm x 43.6 mm (17.4 in. x 16.5 in. x 1.72 in.) |
Weight | Empty: ≤ 5 kg (11.02 lb) |
Note:
(1) | Forty-eight 10/100/1000BASE-T ports | (4) | USB port |
(2) | One console port | (5) | Front card slot |
(3) | ETH management port |
Note:
(1) | ESD jack | (4) | Power module slot 2 |
(2) | Rear card slot | (5) | Power module slot 1 |
(3) | Fan slot |
Model | Description |
GE-SFP Optical Transceiver | |
Optical Transceiver, eSFP, GE, Multi-mode Module (850nm, 0.55km, LC) | |
Optical Transceiver, eSFP, GE, Single-mode Module (1310nm, 10km, LC) | |
Optical Transceiver, eSFP, GE, Single-mode Module (1310nm, 40km, LC) | |
Optical Transceiver, eSFP, GE, Single-mode Module (1550nm, 40km, LC) | |
10G-SFP+ Optical Transceiver | |
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module (850nm, 0.1km, LC) | |
Optical Transceiver, SFP+, 10G, Multi-mode Module (850nm, 0.3km, LC) | |
Optical Transceiver, SFP+, 10G, Single-mode Module (1310nm, 10km, LC) | |
GE Copper Transceiver | |
Electrical Transceiver, SFP, GE, Electrical Interface Module (100m, RJ45) | |
10GE Interface Card | |
ES5D000X2S00 | 2 10 Gig SFP+ interface card (used in S5700SI and S5700EI series |
Model | S5700-52C-SI | |
Fixed Interfaces | 48 Ethernet 10/100/1,000 ports | 48 x 10/100/1,000 Base-T ports |
Subcards supported | 4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard | 4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard |
Extended Slots | two extended slots, one for an uplink subcard and the other for a stack card | two extended slots, one for an uplink sub-card and the other for a stack card |
Power Supply | Double hot swappable AC/DC power supplies | Double hot-swappable AC/DC power supplies |
Forwarding Performance | 132 Mpps | 132 Mpps |
Switching Capacity | 256 Gbit/s | 256 Gbit/s |
Memory (RAM) | 256 MB | 256 MB |
Flash | 32 MB | 32 MB |
RPS | Not supported | Not supported |
PoE | Not supported | Not supported |
Maximum power consumption (100% throughput, full speed of fans) | 78 W | < 88W |
Do you have any question about the S5700-52C-SI (02352356)?
Contact us now via [email protected].
S5700-52C-SI Specification | |
Fixed Ports | 48 × 10/100/1,000 Base-T |
Switching Capacity | 256 Gbit/s |
Forwarding Performance | 132 Mpps |
Extended Slots | two extended slots, one for an uplink subcard and the other for a stack card |
MAC Address Table | IEEE 802.1d compliance |
16K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN Mapping | |
Reliability | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
SEP | |
ERPS (G.8032) | |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) | |
BPDU protection, root protection, and loop protection | |
IP Routing | Static route, RIPv1, RIPv2, RIPng, and ECMP |
IPv6 Features | Neighbor Discovery (ND) |
Path MTU (PMTU) | |
IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
MLD v1/v2 snooping | |
6to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
Eight queues on each port | |
WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms | |
Re-marking of the 802.1p priority and DSCP priority | |
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source | |
MAC address, destination MAC address, source | |
IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID | |
Rate limiting in each queue and traffic shaping on ports | |
Security | User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface, and VLAN | |
Port isolation, port security, and sticky MAC | |
Blackhole MAC address entries | |
Limit on the number of learned MAC addresses | |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC | |
SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense | |
Blacklist and whitelist | |
802.1x authentication, MAC address authentication, and combined authentication on a per port basis | |
Portal authentication on a per VLANIF interface basis | |
Management and Maintenance | Stacking |
MAC Forced Forwarding (MFF) | |
Virtual cable test | |
SNMP v1/v2c/v3 | |
RMON | |
Web-based NMS | |
System logs and alarms of different levels | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Operating Environment | Operating temperature: 0°C to 50°C |
Input Voltage | AC: |
Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
Power Consumption | < 78W |
What is Guaranteed.
After receiving your order, take a full month to try it out. If you find quality is not good , we'll take it back and refund your money. Your complete satisfaction is GUARANTEED or your money back. That's guaranteed.
After your order items which are available. We will use most fast delivery way to global countries. Normally we will ship out cargos during 3 -5 days. And international delivery will take about 3- 10 days according to your location.
Service Never Ends.
Hardwares Warrany Time:
Original New Sealed Hardware: 3 Years
Refurbished/Used Original Devices: 1 Year
After warranty time, you also can contact us to return back for repair service. Everything you purchase from HI-NETWORK.COM. We will offer lifetime online service support for your any possible questions.
DELL Used R740 Rack Server
Cisco 9300 24 Port Switch: A Comprehensive Guide
Cisco 9300 Mode Button
Cisco 9300 48 Port Switch: The Definitive Guide
Cisco 9300 IOS Download from Cisco Software Download Center
Cisco Catalyst 9300 Series Switches Setup Guide
Cisco 9300 ROMmon Mode Recovery
Cisco 9300 Power Stack: Understanding Cisco StackPower White paper
Cisco 9300 Stacking Cable Diagram
How to Master Cisco Switch Stacking: Best Practices and Troubleshooting