Detail: | 24 Ethernet 10/100/1000 PoE+ ports, 4 of which are dual-purpose 10/100/1000 or SFP, with 1 interface slot, with 500W AC power |
Model: | S5700-28C-PWR-SI (02354137) |
Condition: | Factory Sealed New |
Related: | Genuine New OSX010000 (02318170) Huawei 10GBASE-LR SFP+ 1310nm 10km DOM Duplex LC SMF Optical Transceiver Module OEM eSFP-GE-ZX100-SM1550 (02315206) Huawei Compatible 1000BASE-EZX SFP 1550nm 100km Transceiver Module Huawei Switch S5700-28C-SI (02352341) |
Warranty: |
3 Years-Warranty
100% Money-back
Free After-Sales Service
|
Shipping: |
Air Shipping to
United States
, Most Customers Receive during 5-7 Days
?
If you finish the payment today,
your order will arrive within the estimated delivery time. |
Ships to:
5.5
|
2-7 Days
US$
|
Payment: |
More
|
The S5700-28C-PWR-SI is gigabit Layer 3 Ethernet switch based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). With 24 GE ports(10/100/1000Base-T) including 4 Combo ports, it provides a large switching capacity and constant power supply for users based on special PoE function, applicable to various scenarios. Besides, the device can be equipped with multiple card modules to satisfy customers' different needs. The S5700-28C-PWR-SI integrates many advanced technologies in terms of reliability, security, and energy conservation in order to help enterprise customers build a next-generation IT network.
Model | S5700-28C-PWR-SI |
Part Number | 02354137 |
Ports | 24 × 10/100/1,000 Base-T ports |
Extended Slots | 2 extended slots, one for an uplink subcard and the other for a stack card. |
Memory (RAM) | 256 MB |
Flash | 32 MB |
MAC Address Table Size | 16 MAC |
Subcard Supported | 4 x 1,000 Base-X SFP subcard |
Voltage Required | AC: |
Power Device | Do double hot-swappable AC power supplies |
Power Consumption Operational | < 836W(PoE: 740W) |
Forwarding performance | 96 Mpps |
Switching capacity | 256 Gbit/s |
Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
Weight | 8.2 kg |
PoE | supported |
Note:
(1) | Twenty PoE+ 10/100/1000BASE-T ports | (4) | ETH management port |
(2) | Front card slot | (5) | One console port |
(3) | USB port | (6) | Four combo ports |
* The front card slot is equipped with the card module, but the card module should be purchased separately.
Note:
(1) | ESD jack | (4) | Power module slot 2 |
(2) | Rear card slot | (5) | Power module slot 1 |
(3) | Fan slot |
* Ventilating fan, cards and power modules have been installed in the diagram, but they should be purchased alone.
* Before installing or maintaining a switch, wear an ESD wrist strap and insert the other end of the ESD wrist strap into this ESD jack.
Model | Description |
Power Module | |
W0PSA5000 | 500W AC Power Module(gray) |
Optical Transceivers | |
Optical Transceiver, SFP+, 10G, Multi-mode Module (850nm, 0.3km, LC) | |
Optical Transceiver, SFP+, 10G, Single-mode Module (1310nm, 10km, LC) | |
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module (850nm, 0.1km, LC) | |
Optical Transceiver, eSFP, GE, Multi-mode Module (850nm, 0.5km, LC) | |
eSFP, GE, Single-mode Module (1550nm, 100km, LC) | |
Optical Transceiver, SFP, 100M/155M, Multi-mode Module (1310nm, 2km, LC) | |
Optical Transceiver, eSFP, 100M/155M, Single-mode Module (1310nm, 15km, LC) | |
Optical Transceiver, eSFP, FE, Single-mode Module (1310nm, 40km, LC) | |
Copper Transceivers | |
1000BASE-T (RJ45) SFP Electrical Module, Auto Negotiate, 100m | |
Card | |
ES5D000X2S00 | 2 10 Gig SFP+ interface card (used in S5700SI and S5700EI series |
Models | S5700-28C-SI-AC | S5700-28C-PWR-SI | |
Fixed Ports | 24 × 10/100/1,000 Base-T ports, 4 of which are dual-purpose 10/100/1,000 or SFP | 24 × 10/100/1,000 Base-T ports, 4 of which are dual-purpose 10/100/1,000 or SFP | 24 × 10/100/1,000 Base-T ports, 4 of which are dual-purpose 10/100/1,000 or SFP |
Extended Slots | 2 extended slots | 2 extended slots | 2 extended slots |
Power Supply | Double hot-swappable AC/DC | Double hot-swappable AC/DC | Double hot-swappable AC, PoE+ |
Forwarding Performance | 96 Mpps | 96 Mpps | 96 Mpps |
Switching Capacity | 256 Gbit/s | 256 Gbit/s | 256 Gbit/s |
Power Consumption | < 56W | < 56W | < 836W |
Do you have any question about the S5700-28C-PWR-SI (02354137)?
Contact us now via [email protected].
S5700-28C-PWR-SI Specification | |
MAC address table | IEEE 802.1d compliance |
MAC address learning and aging | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
MAC address entries: | |
S5700S-LI series: 8K, S5700-LI/S5700-SI series: 16K, S5700-EI series: 32K, S5720-EI series: 64K, S5700-HI series: S5700-HI: 32K, S5710-HI: 456K, S5720-HI: 128K | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
GVRP | |
MUX VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN Mapping | |
SuperVLAN (supported by the S5700-SI/S5700-EI/S5700-HI series) | |
Ring protection | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
SEP | |
ERPS (G.8032) (supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series) | |
STP, RSTP, and MSTP | |
BPDU protection, root protection, and loop protection | |
BPDU Tunnel | |
Reliability | Ethernet OAM (IEEE 802.3ah and 802.1ag) |
ITU-Y.1731 | |
DLDP | |
LACP | |
E-Trunk (supported by the S5700-SI/S5700-EI/S5700-HI series) | |
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM (supported by the S5700-EI/S5700-HI series) | |
MPLS features | MPLS L3VPN |
MPLS L2VPN(VPWS/VPLS) | |
MPLS-TE | |
MPLS QoS | |
Notes: supported by S5710-EI, S5700-HI and S5710-HI | |
IP routing | Static routing |
RIPv1, RIPv2 and RIPng, ECMP (supported by the S5700-SI/S5700-EI/S5700-HI series) | |
OSPF, OSPFv3, IS-IS, IS-ISv6, BGP and BGP4+ (supported by the S5700-EI/S5700-HI series) | |
IPv6 features | Neighbor Discovery (ND) |
Path MTU (PMTU) | |
IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
MLD v1/v2 snooping | |
6to4 tunnel, ISATAP tunnel, and manually configured tunnel (supported by the S5700-SI/S5700-EI/S5700-HI series) | |
Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics | |
IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series) | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
Eight queues on each port | |
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
WRED (supported by the S5710-EI and S5700-HI) | |
Re-marking of the 802.1p priority and DSCP priority | |
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID | |
Rate limiting in each queue and traffic shaping on ports | |
Security | User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface, and VLAN | |
Port isolation, port security, and sticky MAC | |
MFF | |
Blackhole MAC address entries | |
Limit on the number of learned MAC addresses | |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC | |
SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense | |
Blacklist and whitelist | |
Access Security | DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
Management and maintenance | Virtual cable test |
Port mirroring and RSPAN (remote port mirroring) | |
Remote configuration and maintenance using Telnet | |
SNMP v1/v2c/v3 | |
RMON | |
Web NMS | |
HGMP | |
System logs and alarms of different levels | |
802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI) | |
Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI (except battery LAN switches) | |
NetStream (supported by the S5710-EI, S5700-HI and S5710-HI) | |
sFlow (supported by the S5700(S)-LI/S5700-EI/S5700-HI series) | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Operating environment | Operating temperature: 0℃–50℃ |
Input voltage | AC: |
What is Guaranteed.
After receiving your order, take a full month to try it out. If you find quality is not good , we'll take it back and refund your money. Your complete satisfaction is GUARANTEED or your money back. That's guaranteed.
After your order items which are available. We will use most fast delivery way to global countries. Normally we will ship out cargos during 3 -5 days. And international delivery will take about 3- 10 days according to your location.
Service Never Ends.
Hardwares Warrany Time:
Original New Sealed Hardware: 3 Years
Refurbished/Used Original Devices: 1 Year
After warranty time, you also can contact us to return back for repair service. Everything you purchase from HI-NETWORK.COM. We will offer lifetime online service support for your any possible questions.
DELL Used R740 Rack Server
Cisco Catalyst 9300 Series Switches Setup Guide
Cisco 9300 ROMmon Mode Recovery
Cisco 9300 Power Stack: Understanding Cisco StackPower White paper
Cisco 9300 Stacking Cable Diagram
How to Master Cisco Switch Stacking: Best Practices and Troubleshooting
What Are PoE Switches: Benefits, Applications and Recommendations
Cisco 9300 Password Recovery: A Step-by-Step Guide
Cisco 9300 Data Sheet
Cisco C9200l-24p-4x-e Datasheet Download