Detail: | S7706/S7712 Main Control Unit B (Optional Clock) |
Model: | ES0D00SRUB00 (03030MQR) |
Condition: | Factory Sealed New |
Related: | Huawei Switch S7706 (02113305) Huawei Switch S7712 (02113306) Huawei Switch S7706 PoE (02115713) |
Warranty: |
3 Years-Warranty
100% Money-back
Free After-Sales Service
|
Shipping: |
Air Shipping to
United States
, Most Customers Receive during 5-7 Days
?
If you finish the payment today,
your order will arrive within the estimated delivery time. |
Ships to:
7.5
|
2-7 Days
US$
|
Payment: |
More
|
ES1D2SRUH000 is the Huawei S7706/S7712 Main Control Unit. The ES1D2SRUH000 can be installed in: Slots 07 and 08 in an S7706 chassis, Slots 13 and 14 in an S7712 chassis.
Model | ES1D2SRUH000 |
Part Number | 03031FSL |
Description | S7706/S7712, Main Control Unit H |
Basic functions | Huawei S7706/S7712 Main Control Unit |
Memory | 4 GB |
Flash | 64 MB |
eUSB card | 2 GB |
Dimensions (W x D x H) | 394.7 mm x 426.8 mm x 35.1 mm (15.5 in. x 16.8 in. x 1.4 in.) |
Reserved subcard slot | 243.7 mm x 170.0 mm x 35.1 mm (15.5 in. x 6.7 in. x 1.4 in.) |
Weight | 3.46 kg (7.63 lb) |
Maximum power consumption | 183 W (including subcards) |
Note:
Number | Indicator/Button | Color | Description |
(1) | LINK indicator of a GE optical port | NOTE: | |
(2) | ACT indicator of a GE optical port | ||
(3) | USB indicator | Green | Steady on: USB-based deployment of the card has been completed. |
Yellow | Steady on: The card has finished reading data from the USB flash drive. You can remove the USB flash drive now. | ||
Red | Steady on: The card fails to connect to the network management system (NMS) or fails to register with the NMS. | ||
- | Off: No USB flash drive is connected to the card, the USB port on the card is damaged, or the indicator is damaged. | ||
(4) | ACT indicator of the ETH port | Yellow | Blinking: The port is transmitting and receiving data. |
(5) | LINK indicator of the ETH port | Green | Steady on: A link has been established on the port. |
(6) | RST button | - | Press this button to reset the card. |
(7) | ACT: active/standby status indicator | Green | Steady on: The card is the active main control unit of the switch. |
(8) | RUN/ALM: running status indicator | Green | Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running. |
Red | Steady on: The card has failed and the fault requires manual intervention. | ||
Yellow | Steady on: The card is powered off. |
Note:
(1) | One subcard slot. A subcard for the main control unit can be installed in this slot. |
(2) | Two GE ports (reserved). |
(3) | One USB port. It is used to load software from a USB flash drive. |
(4) | One console port. It can connect to a configuration terminal to implement onsite configuration of the S7700. |
(5) | One ETH management port (10/100BASE-TX auto-sensing). It can connect to a network port of a configuration terminal or network management workstation to set up a local or remote configuration environment. |
Do you have any question about the ES1D2SRUH000 (03031FSL)?
Contact us now via [email protected].
ES1D2SRUH000 Specification | |
Basic Information | |
Model | ES1D2SRUH000 |
Part Number | 03031FSL |
Description | S7706/S7712, Main Control Unit H |
Level-1 category | MPU |
Technical Specifications | |
Dimensions without packaging (H x W x D) [mm(in.)] | 35.1 mm x 397.2 mm x 430.4 mm (1.38 in. x 15.64 in. x 16.94 in.) |
Weight without packaging [kg(lb)] | 3.46 |
Typical power consumption [W] | 132 |
Typical heat dissipation [BTU/hour] | 450.4 |
Maximum power consumption [W] | 183 |
Maximum heat dissipation [BTU/hour] | 624.41 |
Memory | 4 GB (not expandable) |
Storage | eUSB: 2 GB (built-in) |
What is Guaranteed.
After receiving your order, take a full month to try it out. If you find quality is not good , we'll take it back and refund your money. Your complete satisfaction is GUARANTEED or your money back. That's guaranteed.
After your order items which are available. We will use most fast delivery way to global countries. Normally we will ship out cargos during 3 -5 days. And international delivery will take about 3- 10 days according to your location.
Service Never Ends.
Hardwares Warrany Time:
Original New Sealed Hardware: 3 Years
Refurbished/Used Original Devices: 1 Year
After warranty time, you also can contact us to return back for repair service. Everything you purchase from HI-NETWORK.COM. We will offer lifetime online service support for your any possible questions.
DELL Used R740 Rack Server
How to Master Cisco Switch Stacking: Best Practices and Troubleshooting
What Are PoE Switches: Benefits, Applications and Recommendations
Cisco 9300 Password Recovery: A Step-by-Step Guide
Cisco 9300 Data Sheet
Cisco C9200l-24p-4x-e Datasheet Download
C1300-24FP-4G Datasheet Download
Cisco C1300-16FP-2G Datasheet Download
Cisco Catalyst 1300 Series Switches datasheet free PDF download
Cisco 9300 Password Recovery